Nintendo Switch Dock Not Working

Some physical concerns, such as the dock being dropped from a great height, being wet, being struck by anything hard, or experiencing a power surge, or a damaged cable, have been found to cause the dock to malfunction on occasion.

If the Nintendo Switch Dock Not Working, What Methods should be Taken to Rectify the Situation?

You can try the alternatives we’ve provided below, but before you do, please reload and restart your Switch Dock to be sure there is no physical damage.

Nintendo Switch Dock Not Working

Method 1: Completely Power Cycle Everything by Unplugging it.

Make sure to power cycle everything in your setup before attempting any technical fixes.

This resolves the issue by resetting your temporary configurations and preparing the system for the development of new configuration files for all of your devices.

Remember to back up your information to iCloud before you do this.

What to do:

  1. Turn off your Switch Dock’s power and disconnect the HDMI cable.
  2. Next, you’ll need to hold the power button for a minimum of ten to thirteen minutes.
  3. You can also try recycling your TV and Nintendo after 30–40 seconds.
  4. Try reconnecting the Nintendo switch and turning on the console to see if the issue persists.

Method 2: Inspect the Power Cords

The Switch dock connects your TV to your Nintendo Switch and charges the device, thus it needs a good amount of electricity.

It may be that the Switch is not receiving enough power from the extension cord, in which case you should unplug it and connect it straight to the wall outlet to see if it fixes the problem.

It’s hard to explain, but it’s helped a lot of people.

Method 3: It’s Crucial to Install Cables in the Right Sequence.

If none of these issues sound like they apply to your situation, a possible cause could be a wrong order of Cables. The Switch has been found to function successfully when the power cable, the HDMI cable, and the Switch are inserted in the specified order.

When you connect the Switch dock to an HDMI source without first turning on the TV, the dock’s firmware will fail.

Look at this list to verify the exact sequence:

  1. If you want to use the switch dock, you need to disconnect all of the cables.
  2. It’s time to plug the Power cord into the switch Dock to make sure it’s getting juice.
  3. Seeing if the power indicator light is on is easy.
  4. Plug in the Nintendo Switch’s HDMI cord, and then place it into the dock.
  5. Assuming all goes well, the light should remain green.

Method 4: Double-Check the HDMI Cable

Even though your Nintendo Switch is docked and charging, it may not be properly connecting to your TV. The HDMI cable is your primary connection to the television.

In this case, you probably immediately thought to make sure the HDMI cable was connected correctly. You can solve your issue by double checking the HDMI cord.

What to do:

  1. If your laptop or computer doesn’t recognise the HDMI cable, try connecting it to another laptop or computer and see if that works.
  2. The opposite end must be free of any additional connections.
  3. You will need to replace your broken HDMI cable if you want to use your devices.


The solution to your Nintendo Switch Dock problem is as simple as discovering the right combination of keys.

Is your Nintendo Switch Dock problem now resolved? Drop a line in the remark section and let us know.

Leave a Reply