When Windows detects an IP address conflict on your computer, it means that one or more devices are using the same IP address as your PC at the same time. When a router assigns the same IP address to multiple computers, this occurs.
Not only that, but even if only one device is linked to the same network, it can happen. It will be unreachable if more than one computer has the same IP address. Every IP address has a unique address for identifying and determining a device, which is well known and widely used.
How to Repair In Windows 10, 8, and 7, Windows has detected an IP Address Conflict Error
Take your time going over the steps and making sure you follow them exactly. If an issue arises between then and now, you can restart these Solutions.
1. Restarting the Router
It’s conceivable that your router is unable to provide your computer with a proper IP address. This could potentially be the cause of the error. Follow the steps below to fix the Windows has Detected an IP Address Conflict error:
Step 1. Start by going to the router’s Power button. When you have the power button, push it (this will turn off the router). Now, wait for ten to twenty seconds. Finally, to turn on the router, press the Power button one again.
2. Change Network Adapter Settings
The issue “Windows has detected an IP address conflict” may be resolved by disabling and enabling the Network Adapter again.
Step 1. Hold down the Windows Key and the R key at the same time. After that, type “ncpa.cpl” and press the Enter key. Meanwhile, make sure you don’t have “Network Adapter Missing Error” on your PC.
Step 2. Now it’s time to turn off the wireless adapter. So, right-click on your Wireless Adapter to bring up a menu, and then select Disable from the menu. This is done to disable your computer’s network adapter.
Step 3. Right-click the Wireless Adapter once more, and a menu will display. Select Enable from the drop-down menu. This will assist you in restarting your computer’s Network Adapter.
3. Disable IPv6
Follow the simple procedures outlined below to disable IPv6:
Step 1. To begin, hold down the Windows key and the R key at the same time. A new window will appear on your computer screen. In the blank field, put “ncpa.cpl” and press Enter. A window titled Network Connection will appear.
Step 2. Right-click Network Adapter and select Properties. After that, choose a property from the drop-down menu. In the properties, search for window and uncheck Internet Protocol Version 6 (TCP/IPv6), then click OK.
4. Release and Renew IP Addresses
In a shorter amount of time, this solution will resolve the “Windows has identified a 1P address conflict.” Because the Command prompts will change the system’s core, carefully follow the steps.
Step 1. First, go to the start menu and type “cmd” into the search box that appears. A list will appear, and you can search for the option ‘cmd’. You may also accomplish this by hitting Windows Key + X and selecting Command Prompt from the menu (Admin).
Step 2. After that, a dark window will appear. Press Enter after typing “ipconfig/release.” You must now wait for the arrow key to appear on the Command Prompt screen once more (black screen).
Step 3. When you get to the dark screen, type “ipconfig/renew” and push Enter. Check to see if your PC is experiencing any DNS Address Could Not Be Found Errors. Once you’ve finished, you can relax and continue browsing the internet.
5. Automatically Obtain IP Address and DNS
Step 1. Launch a pop-up window. To open it, hold down the Windows Key and the R key at the same time.
Step 2. Next, click the box and type “ncpa.cpl” into the blank space before pressing Enter. This will bring up the Network Connections window.
Step 3. Locate Local Area Connection in the Network Connections window and right-click on it. A drop-down menu will appear, from which you can select the Properties option.
Step 4. You will notice that a new window has appeared. Double-click on Internet Protocol Version 4 (TCP/IPv4) to open it. Then, in this box, choose the Obtain an IP address automatically and Obtain DNS server address automatically choices. By selecting the OK option, you can confirm this.
Step 5. Finally, reboot your computer to see if the problem message Windows has Detected an IP Address Conflict has vanished.
The Last Word
We’ve offered the best remedies we know of, and we hope the options above have helped you resolve the error “Windows has identified a 1P address conflict.” If you run into this difficulty again in the future, apply the preceding solutions instead of wasting time.
